DigiBAR is an electronic measuring instrument designed and produced to take measurements of glazing beads.

DigiBAR is made with an aluminium profile on which slides a plastic cursor containing the electronics and batteries.

DigiBAR can take measurements from 140mm to 1600mm with the accuracy of 0.1mm and by installing the extension bar can measure up to 3000mm

The electronic control unit is equipped with an absolute magnetic measuring system ( no need zero setting), an advanced radio interface and internal memory, measurements can be stored on board or sent to the electronic length stop DigiSTOP or to any other DigiFAMILY device

The battery lasts up to at least 8/9 consecutive hours, to recharge DigiBAR simply insert it into the DigiCHARGER docking station (option) or connect the appropriate power supply to the cursor without removing the batteries DigiBAR has been upgraded and improved during the last 10 years of production, now there is a big handle with a strong push button on both sides of it, to be comfortably operated from left and right handed people, there is the possibility to recharge DigiBAR during the working cycle while it is placed on the DigiCHARGER (to suit the 24 hours shift). The radio interface has been updated to the latest

technologies. The extension bar has been modified to be fitted easily and without screws. The software has been updated to be faster and following the hints given by our customers.



The DigiBAR can be used also in the production of windows out of square.

With a special set of blocks designed to be inserted in the vertex of the window with every angle it's

easy to find the real length of the bead needed.

The blocks are able to rotate to let the operator take the measure in the easiest way.



Minimum measure

140 mm

Maximum measure (without extension )

1600 mm

Maximum measure (with extension )

3000 mm


2190 gr

Power supply

4 AAA rechargeable batteries

Measuring system

Absolute magnetic (no zero setting needed)


2 lines, 16 characters LCD


Industrial protected 6 keys


2 LED (green for power on and charging , orange for measure in memory)


Internal integrated


Integrated handle with double industrial button to send sizes


Real time radio transmission to any DigiFAMILY device

DigiBAR is able to store up to 100 measure when is out of radio range

You can use 99 different correction values (for cutting beads at 90 ° or overlap)

You can associate an alphanumeric reference for each measurement to indicate the type of cutting bead and / or colour, or to automatically set a cutting cycle

You can set a proportional correction factor as a function of the measured reading.

The software handles 3 different extension bars. (as a standard we supply one extension bar )

SLEEP function to save batteries and a quick return to work