The Digi-BS system is the integration of a technologically advanced saw and a length stop.
The saw is an 'Up-cut' type of saw with a blade diameter of 250 mm, the positioning of the

rotary table which allows angles from 20° to 160° is accurately controlled from a CNC unit.
The unique mechanical structure of the Digi-BS is specifically designed for the cutting of

glazing beads and for this reason the Digi-BS includes a quick-adjusting device for the blocks.

This innovative system allows you to work a wide varied range of beads without the additional need for profile specific

bead blocks, the design of the machine also allows you to make the 'arrow cut'  (typical of PVC glazing beads)

by making the two cuts required in one programmed operating sequence.

The cutting area is fully protected by a protection guard which can be opened for access,

but for the operators safety is interlocked with a safety device that prevents opening while the machine is operating.

The Digi-BS has a very fast cutting cycle due to the 'short stroke' action of cutting blade.

Additionally the Digi-BS has also been equipped with an adequate system for waste pieces to be expended from the machine

and is supplied with two outlet ports for the dust extraction system.

The length stop is made of robust aluminum structural profiles with a stepper motor controlled integrated carriage positioning system,

this positioning system is managed by the control unit and the measurement is verified with a magnetic measurement system

that can reach the very impressive accuracy of ±0.1mm.

This allows to the length stop to achieve optimal positioning speeds combined with high precision.


There are many advantages with a machine that integrates a miter saw and a length stop such as:

Unique control system which manages all the functions of the "two" machines

Easier to operate, a single screen with few operator interface buttons  to control both units

No need for interconnection between the two units as the control system knows and controls

both the positions of the blade and the length stop fence.



The new control unit of DigiBS integrates an USB port, Ethernet port and a radio interface used for the reception of measurements from Digi-FAMILY devices.

It offers multiple solutions to compile / get the list of measurements to be cut as:

Radio reception from Digi-BAR electronic caliper

Radio reception from Digi-BARCODE bar code reader

Reading cutting lists from a USB memory

Receive cutting lists via Ethernet

Receive cutting lists via WI-FI (optional)

 Cutting Unit

Kind of cut

Up cut saw

Cutting angles

CNC controlled “arrow cut” from 20 to 160 degrees


Ø 250mm

Blade Motor

Three phase 0.75kW 2800 rpm



Positioning Unit  (Length stop)

Minimum piece measure

180 mm

Maximum piece measure


Carriage movement

Stepper Motor, magnetic encoder feedback


±0.1 mm

Positioning speed

Up to 50 m/min




Control unit

HMI 7” colour touch screen + plc cards

Radio Interfaces


USB for external input device / pendrive