DigiSC 4.0

DigiSC 4.0 is a system that integrates a miter saw and an electronic roller conveyor (Length Stop).
The saw is an “U-Cut” type saw  (blade diameter 400mm).
The cutting angle is fixed at 90 ° The mechanical structure is specifically designed for cutting aluminum or PVC profiles.
The cutting area can be configured by moving the back square in four different positions in order to modify the cutting diagram and easily work large sections.
The bars clamp is ensured by two vertical and two horizontal pneumatic cylinders
The clamping / cutting area is fully protected by a pneumatically operated device with large transparent areas to ensure excellent visibility.
DigiSC 4.0 is also equipped with a box into the machine chassis to collect cutting chips.
The machine is available in the ALU version with Oleo-Pneumatic blade feeding, blade lubrication and sliding rollers on the length stop  and in the PVC version, with pneumatic blade feeding, and length stop table in aluminum.
The variants in length are 4, 3000,4000,5000 and 6000mm
The electronic Length Stop  (measuring stop) is made with strong aluminum profiles that integrate the carriage sliding system.
The positioning of the stop is managed by the numerical control and the measurement is verified thanks to a magnetic band system with a tolerance of ± 0.1 mm.
This allows you to operate with exceptional precision combined with a high positioning speed.

General Features
Kind of cut “up-cut saw”
Cutting angle  Fixed 90°
Blade diameter Ø 400mm
Blade motor Three-phase 1.3Kw 2800/’
Blade feed Oleo-pneumatic (ALU vers.)
Pneumatic  (PVC vers.)
Bars Positioning Two Vertical Pneumatic Clamps
Two Horizontal Pneumatic Clamps
Working Plane height 950mm +/- 30mm
Minimum and Maximum piece measure 140-3000-4000-5000-6000mm
Weight 305 kg
Power supply Tree phases 400V 50/60Hz
Carriage Movement Stepper motor, magnetic encoder feedback
Accuracy ±0,1 mm
Positioning speed Up to a 50 m/’


DigiSC 4.0 is controlled by a 15” Touch Screen Industrial PC connected to PLC cards.

The Windows 10 IoT Industrial operating system combines the simplicity of the Windows environment with the stability of systems intended for production environments.

The DigiSC control unit integrates an advanced radio interface that is able to create and manage a robust radio network in the whole workshop. All the products of the DigiFAMILY family are able to use this network to exchange information.

Integration with the DigiBAR 4.0 electronic gauge is the most common and easiest way to work with the DigiSC 4.0: a cutting list is generated in real time on the screen during the measurement cycle.

The new color touch screen contains all the information the operator needs during the work cycle, the colored areas clearly and immediately indicate the status of the machine.

DigiSC 4.0 is a CONNECTED MACHINE. Configurations, workshop data, parameters and production data are constantly saved on the new DigiCLOUD platform. This service allows you to minimize restart times in the event of hardware and software problems.

The machine program equipped with on-line contextual help that informs the operator about the machine’s commands and, in case of breakdowns, offers a problem-solving service guiding the operator to solve the problem with photos and electrical / pneumatic diagrams directly on the screen.


The software allows you to:

– Manual insertion of measurements from interface (semi-automatic)

– Automatic removal of the stop after each cut to facilitate the removal of the piece.

– Receive the cutting / clamping signal (optional) from the miter saw and display its status on the screen.

– Radio reception of the measurements from the DigiBAR electronic gauge and creation of the cutting list (Automatic).

– Perform positioning cycles while receiving measurements

– Loading of the cutting list via USB memory.

– Reception from the Ethernet / Wi-Fi network of the cutting list.

– Add, delete and edit any row at any time.

– Skip from one line to another

– Manage the Head cutting

– Machine data recovery saving on DigiCLOUD platform

– Consultation / export of production data / machine status (in compliance with Industry 4.0 protocols) *

(* Requires activation and subscription)


DigiSC 4.0
Image Slide 1
Image Slide 3
previous arrow
next arrow

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *