DigiSTOP4.0 is a technologically advanced electronic length stop out-feed side, connected to a mitre saw allows precise positioning of aluminium, wood and PVC bars
The length stop is made of robust structural aluminium profiles that integrate the sliding track of the carriage, the machine can have a stroke of 3000/4000/5000/6000 mm. The positioning of the fence is carried out by a stepper motor integrated in the carriage and is managed by an electronic control unit which, in the M version, thanks to the magnetic band, allows a positioning precision of 0.1 mm and allows the roller to operate with High speed and precision.
The machine is ” reversible ” , by sliding the electrical panel from one side to the other of the structural profile and   can be installed on the left or right side of the mitre saw.
DigiSTOP is available in R version with rollers on the working plane
DigiSTOP “M” is the version with magnetic measurement system that allows a ” closed loop positioning of the fence ” and with the highest precision
The 4.0 version of DigiSTOP offers the most advanced technology available currently on the industrial market.
The new and large 15” touch screen industrial PC is equipped with the Windows 10 IoT operating system
This operating system has “industrial” characteristics, we have deeply customized it to obtain reliability that is not proper to domestic or office systems.
The Wi-Fi and Ethernet interface are standard, the machine will be connected to the new DigiCLOUD service, this allows a continuous saving of the data, in case of hardware or software failure, it will be possible to resume production quickly and without Data/Settings loss.
Remote assistance will be simple and effective.

Configuration To the left or to the right of Mitre Saw
Working plane height 920mm +/-30mm(950mm+/- 30m “R”)
Maximum and minimum measure adjustable 0-3000/4000/5000/6000 mm
Weight 105 Kg
121 Kg3000 mm “R”
Power supply Single phase 230 V 50/60 Hz
Carriage movement Stepper motor
(magnetic encoder feedback on “M” version)
Carriage speed 50 mt/min
Accuracy +/- 0.3mm
+/- 0.1mm M Version

DigiSTOP 4.0 is controlled by a 15” Touch Screen Industrial PC connected to PLC cards.
The Windows 10 IoT Industrial operating system combines the simplicity of the Windows environment with the stability of systems intended for production environments.
The DigiSTOP4.0 control unit integrates an advanced radio interface that is able to create and manage a robust radio network in the whole workshop. All the products of the DigiFAMILY family are able to use this network to exchange information.
Integration with the DigiBAR 4.0 electronic gauge is the most common and easiest way to work with the DigiSTOP4.0 Length Stop: a cutting list is generated in real time on the screen during the measurement cycle.
The new color touch screen contains all the information the operator needs during the work cycle, the colored areas clearly and immediately indicate the status of the machine.
DigiSTOP 4.0 is a CONNECTED MACHINE. Configurations, workshop data, parameters and production data are constantly saved on the new DigiCLOUD platform. This service allows you to minimize restart times in the event of hardware and software problems.
The machine program equipped with on-line contextual help that informs the operator about the machine’s commands and, in case of breakdowns, offers a problem-solving service guiding the operator to solve the problem with photos and electrical / pneumatic diagrams directly on the screen.
The software allows you to:
– Manual insertion of measurements from interface (semi-automatic)
– Automatic removal of the stop after each cut to facilitate the removal of the piece.
– Receive the cutting / clamping signal (optional) from the miter saw and display its status on the screen.
– Radio reception of the measurements from the DigiBAR electronic gauge and creation of the cutting list (Automatic).
– Perform positioning cycles while receiving measurements
– Loading of the cutting list via USB memory.
– Reception from the Ethernet / Wi-Fi network of the cutting list.
– Add, delete and edit any row at any time.
– Skip from one line to another
– Manage the Head cutting
– Machine data recovery saving on DigiCLOUD platform
– Consultation / export of production data / machine status (in compliance with Industry 4.0 protocols) *
(* Requires activation and subscription)

DigiSTOP 4.0
Image Slide 1
doppia barra
Digistop R Barra
Digistop R tot
previous arrow
next arrow