DigiSC 4.0 – Bead saw for ALU and PVC cutting at 90° with integrated Length Stop

DigiSC 4.0 is a system that integrates a bead saw and an electronic length stop.
The saw is an uprising “U-Cut” type saw with a blade diameter of 400mm.
The cutting angle is fixed at 90°. 

The machine is available as follows:

  • version A for aluminum profiles with Oleo-Pneumatic blade feeding, blade lubrication and sliding rollers on the length stop
  • version P for PVC profiles with pneumatic blade feeding, and a length stop table in aluminum

The available working lengths are 3000, 4000 ,5000 or 6000 mm

Request information

DigiSC 4.0 is “reversible”, with the possibility of having the outfeed table both on the left or on the right side of the machine. Even after installation, sliding the electrical panel from one side to the other, the length stop can be easily placed on the left or the right side of the bead saw.

The cutting area can be configured by moving the back square in four different positions in order to modify the cutting diagram and easily work large sections. The bars clamp is ensured by two vertical and two horizontal pneumatic cylinders, where the clamping / cutting area is fully protected by a pneumatically operated device with large transparent areas to ensure excellent visibility.

DigiSC 4.0 is also equipped with a box into the machine chassis to collect cutting chips.
The electronic Length Stop  is made with sturdy aluminum profiles that integrate the carriage sliding system.
The positioning of the stop is managed by the numerical control and the measurement is verified thanks to a magnetic band system with an error of ± 0.1 mm.
This allows you to operate with exceptional precision combined with a high positioning speed.

Cutting list creation

  • Manual entering of data from touch screen
  • Loading files from USB memory, Ethernet or Wi-Fi (.txt)
  • Radio reception of measurements from the DigiBAR electronic gauge and automatic creation of list

It is possible to add, delete and edit any line at any time, selecting the line directly from the touch screen. If needed, the machine is able to manage the head cut of any initial cutting cycle.
The carriage fence moves automatically away from the saw after the cutting operation to facilitate cut piece removal. Moreover, the color touch screen contains all the information the operator needs during the work cycle, the colored areas clearly and immediately indicate the status of the machine. 

The integration with the DigiBAR 4.0 electronic gauge is the most common and easiest way to work with the DigiSC bead saw: a cutting list will be automatically generated in real time during the measurement cycle.

The DigiSC control unit integrates an advanced radio interface that is able to create and manage a robust radio network in the whole workshop.

All the products of the DigiFAMILY family are able to use this network to exchange information.

Cutting angle

90°, Speciale

Data Sheet

Scheda tecnica DigiSC DigiSE 4.0 diag. di taglio

General Features
Kind of cut  Single Bar Up cut saw
Cutting angles  90°
Blade D 400 mm (blade lubrication system supplied on A Vers)
Blade Motors Tree-phases 1.3 kW 2800 rpm
Cutting feeding Oil-Pneumatic feed (on A Vers.)
Pneumatic feed (on P Vers. ),
speed adjustment by external knob
Bars positioning Rear square adjustable in 4 different positions
Two vertical and two horizontal pneumatic clamping devices adjustable according to profile
Working plane height 950mm +/-30mm 
Minimum and maximum piece measure 140-3140 4140 5140 6140  mm
Weight 300 Kg
Power Supply Tree phases 400V 50/60Hz
Carriage movement  Stepper Motor, Magnetic encoder feedback 
Accuracy ±0,1 mm
Positioning speed 40 m/min


Electronics and Software

HMI  Indust. PC 15” Touch Screen SSD Win 10 IoT
Radio Interface (DigiBAR commun.) Integrated
USB port for Keyboard Memory  Integrated
WI-FI Integrated
Ethernet Integrated

menu digiSC taglioSemiautomatico

DigiSC 4.0 is controlled by a 15” Touch Screen Industrial PC connected to PLC cards. 

The Windows 10 IoT Industrial operating system combines the simplicity of the Windows environment with the stability of systems intended for production environments. 


Configurations, workshop data, parameters and production data are constantly saved on the new DigiCLOUD platform. This service allows you to minimize restart times in the event of hardware and software problems. 

The operating system is equipped with an on-line contextual help that informs the operator about the machine’s commands and, in case of breakdowns, offers a problem-solving service guiding the operator to solve the problem with photos and electrical / pneumatic diagrams directly on the screen. 

DigiINDUSTRY 4.0 (optional) is an additional service that allows production data analysis, to monitor the status of the machine and the working processes, in compliance with the Industry 4.0 procedures.


Download Brochure